The InTENSity™ IF Combo combines TENS and Interferential electrotherapy modes to give you the best chance of treating patients that may need something stronger than a standard TENS unit. The IF Combo has 4 modes of Tens and 4 modes of Interferential, ensuring that your patient is getting the most pain relief. The unit is 105 mA strong and comes complete with an AC adapter to allow patients to get relief anywhere.
Simple to operate, portable device for pain management
Combines TENS and Interferential (IF) treatment for patients needing stronger therapy
Indications For Use: Symptomatic chronic pain, acute post-traumatic or post-surgical pain
Channel: Dual, isolated between channels
Power Source: Standard 9-volt battery, or AC adapter (100-240V)
Dimensions: 4.5” x 2.55” x 0.9”
Weight: 0.28 lbs. with battery
Timer: Adjustable from 1-60 minutes, or (C) for Continuous use
Electrode Detection Function:
Amplitude level will be reset to 0mA when it reaches 12mA or greater and an open circuit at either channel is detected.
Optimal electrode placement is about 2-3 inches apart.
One Year Manufacturer Warranty
Package Includes Everything Needed To Begin Treatment Right Away:
1x InTENSity IF Combo Device
2x Sets Of 45" Lead Wires
1x Pack Of Four Reusable Electrodes
1x 9V Alkaline Battery
1x AC Adapter
Hard Plastic Carrying Case
TENS: Monophasic Square
Interferential: Biphasic Square
TENS: 1-150 Hz
Interferential: 125µs, Phase duration: 250µs
TENS: Constant Current
Interferential: Constant Current
TENS: 4 treatment modes
Pulse Width Modulation (P3)
Pulse Rate Modulation (P4)
Interferential: 4 treatment modes
(Refer to Instruction Manual for full details)
TENS: 1-60 minutes, or Constant
Interferential: 1-60 minutes, or Constant
Frequency: 1-50 Beats
Placement of Electrodes:
The placement of the electrodes is very important to the success of the treatment, therefore please place electrodes according to the instructions of your treating physician.
When operating in a 4-Pad treatment mode, the electrodes should be placed on the body as described in the picture diagram. The arrangement of these 4 electrodes will allow the intersection of the 2 sinusoidal outputs, which will result in the required beat frequency. In a 2-Pad treatment mode, 2 separate pairs of electrodes can be used simultaneously to treat two different body regions.